![](https://www.flowmeterliquidcontrol.com/wp-content/uploads/2022/06/Pompa-Celup-Pedrollo-Air-Bersih-TOP-MULTI-II-copy.jpg)
Description :
Pompa Celup Pedrollo Air Bersih TOP MULTI II
Range Of Performance
Flow rate up to 100 l/min (6 m3/h)
Head up to 3 m
Limits Of Use
Submersible depth up to 10m
Liquid temperature up to + 40°C
Maximum sand content 50 g/m3
Emptying level up to 30 mm from the bottom
Installation And Use
They are recommended for pumping clean water with a sand content no higher than 50 g/m3.
Their high efficiency and realibility makes them suitable for supplying domestic water from tanks, reservoirs or relatively deep wells, drawing rainwater from cisterns, watering by hand or feeding.
Construction characteristics
Delivery body and suction grid : glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1.
Impellers and diffusers : Technopolymeer
Diffuser Container : Stainless steel AISI 304
Motor shaft : Stainless steel EN 10088-3-1.4104
Double seal : Mechanica seal ceramic-silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Motor : asyichronous, for continuous duty
Top multi : Single-phase 220÷240V – 50 Hz with capacitor and thermal overload protector.
Insulation : Class F
Protection : IP 68
Registered model n ° 72765
Standard features
Top-Multi Float switch
Neoprene power cable “H05 RN-F” length 10 metres with shuko plug
hosetail
Coupling with non-return valve